Initial Application: Strip floor using the appropriate professional floor stripper, following the instructions on the product label. Apply 3 or more medium coats of Prolong 485 finish using a clean finish mop. Apply additional coats until desired gloss is obtained. Allow 30-40 minutes drying time between coats. Temperature, humidity and ventilation may add to drying time. Allow finish to cure for 24 hours before spray buffing or burnishing.
Maintenance: Dust mop or sweep floor first. Clean floor with a mop or automatic scrubber using the recommended cleaner, following directions on label. To enhance appearance, spray buff or burnish. To spray buff, use Shine-Bac or Reno spray buff and a medium pad with approx. 300 rpm equipment. Ultra-high speed burnish using a medium pad and 1200-2500 rpm equipment.
Recoat: Dust mop or sweep. Clean the floor with a dust mop or an automatic scrubber using the recommended cleaner, following directions on label. Apply 1-2 uniform coats of finish using a clean mop. Allow finish to cure for 24 hours before spray buffing or burnishing.
Removal: Remove using recommended floor stripper following the directions on the label.
