Initial Application: 1. Strip floor using the appropriate professional floor stripper, following the instructions on the product label.
2. Apply 3 or more medium coats of Patriot 21 finish using a clean finish mop. Apply additional coats until desired gloss is obtained.
3. Allow 30-40 minutes drying time between coats. Temperature, humidity and ventilation may add to drying time. Allow finish to cure for 24 hours before burnishing.
Patriot 21 is ready to use, do not dilute.
Regular Maintenance: 1. Dust mop or sweep floor. 2. Clean floor with a mop or automatic scrubber using the recommended cleaner, following directions on label. 3. To enhance appearance burnish as required. Ultra-high speed burnish using a natural fiber pad and 1200-2000 rpm equipment. 4. To recoat, apply 1-2 uniform coats of finish using a clean mop. 5. Allow finish to cure for 24 hours before burnishing. 6. For best results apply when ambient temperature is between 15ºC-25ºC.
Removal: Remove using recommended floor stripper following the directions on the label. Disposal of this product, solutions and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements.
