Into a clean mop bucket filled with water, pour one 946ml bottle of Mega Lift-Off. Depending on bucket Size, this will yield a 1:20 to 1:30 dilution of Mega Lift-Off to water. Apply mixed liquid liberally to floor. To insure penetration through multiple layers of floor finish, be sure to leave surface wet for at least 10-20 minutes. Agitate with a mop or brush. Use a scraper or hand pad to remove heavy finish build-up in corners and edges.
Do not allow to dry. If necessary, agitate with a floor machine using appropriate stripping pads. Pick up solution using a wet vacuum or auto-scrubber.
Re-apply if all old finish is not removed. Rinse floor thoroughly with water to make sure no stripper solution exists on the floor. Allow floor to dry. apply finish or sealer as required, following application directions on the label.
Do not use on painted surfaces or wooden floors.
Use cautiously for stripping linoleum, rubber or asphalt tile as stripper mat cause bleaching, softening or bleeding. Wipe any spills or splashing from baseboards or painted surfaces immediately.
