Initial Application: strip floor using the appropriate professional floor stripper, following the instructions on the product label. If stripping is not necessary, use Pearl Scrub to prepare the floor. Apply 3 or more medium coats of Perennial Plus finish using a clean finish mop. Apply additional coats until desired gloss is obtained. Allow 30-40 minutes drying time between coats.
Temperature, humidity and ventilation may add to drying time. Allow finish to cure for 24 hours before spray buffing or burnishing.
Maintenance: Dust mop or sweep floor first. Clean floor with a mop or automatic scrubber using the recommended cleaner, following directions on label. To enhance appearance, spray buff or burnish.
To spray buff, use Shine-Bac or Reno spray buff and a natural hair pad with 1200-2000 rpm equipment.
Recoat: Dust mop or sweep. Clean the floor with a wet mop or an automatic scrubber using the recommended cleaner, following directions on label. Apply 1-2 uniform coats of finish using clean mop.
Removal: Remove using recommended floor stripper.
FOR BEST RESULTS: Do not dilute. Do not use on cold surfaces.
To avoid contamination, do not return used finish to original container.
