Connect dispenser to unheated tap water. Move grey lever up on dispenser, insert bottle spout first , then move grey lever back down. When ready, press appropriate button to activate flow of diluted product into bottles, buckets or auto scrubbers.
To clean and disinfect hard, non-porous surfaces press the dispenser button for spray bottles which will give a 1:12 ratio of product. Apply the solution using a spray, clean cloth, or sponge. Ensure the surface remains wet for 10 minutes before wiping or rinsing clean. Pre-cleaning is required for heavily soiled areas.
When used on surfaces that may come into contact with children at the mouthing stage of development, a potable water rinse is recommended after disinfection. In food processing and preparation areas, care must be taken to avoid food contamination during application. All treated surfaces must be rinsed with potable water before food contact.
For use on non-critical medical equipment in healthcare settings (e.g., stethoscopes, hospital beds, wheelchairs), this product can be used for cleaning but is not intended as a sterilant or high-level disinfectant. It may, however, be used to pre-clean or decontaminate critical or semi-critical medical devices prior to sterilization or high-level disinfection.
This product is also suitable for general cleaning applications such as bathrooms, kitchens, grease removal, carpets, tiles, grout, cutting boards, stainless steel, floors, and for use in auto-scrubbers.
