Ideal method is to use a pressure washer to apply product and rinse surface. Pre-spot especially dirty areas covered with mold or mildew. For normal cleaning dilute at 1:20 with water. Apply to surface with low pressure spray, allowing contact time of 5-10 minutes. Scrub or rinse with high pressure water spray.
Do not allow product to dry on surface.
Do not mix with anything except water. Always follow manufacturer’s directions for operation and chemical application through a pressure washer.
For manual cleaning, dilute product in bucket at 1:20 with water, apply to surface and scrub as required.
Rinse with a garden hose.
