DISINFECTION: For water hardness up to 250 ppm add 16ml per litre of water to disinfect hard non-porous surfaces OR mix a 64 ml packet with 4 litres of water.
For heavy-duty use add 64ml per litre of water, to disinfectant hard non-porous surfaces. Apply at 16 ml per litre of water to hard inanimate, non-porous surfaces thoroughly wetting surfaces as recommended and required, with a cloth, mop, sponge or sprayer.
For heavily soiled areas, a preliminary cleaning is required. In all cases, treated surfaces must remain wet for 10 minutes. Prepare a fresh solution at least daily or when use solution becomes diluted or soiled.
NON-ACID TOILET BOWL DISINFECTANT/CLEANER DIRECTIONS: Pre-clean to remove heavy soil. From concentrate: Add 16 ml to the toilet bowl and mix. Brush thoroughly over exposed surfaces and under the rim. Allow to stand for 10 minutes and flush. From Use Solution: Empty toilet bowl or urinal and apply 16 ml per litre use solution to exposed surfaces, including under the rim with a cloth, mop, sponge or sprayer, brush or swab thoroughly and allow to stand for 10 minutes and flush. For sprayer application, use a coarse spray device.
For Heavy Duty: Same as above but apply 64 ml per litre solution.
