Initial Application: Remove old wax or finish using a suitable floor stripper. Rinse thoroughly with clean water. Apply a uniform coat of Duralok 475 using a hard string mop or wax applicator. Allow to dry (approximately 30 minutes). Apply 2-5 coats as required.
Note: For optimum appearance or to improve adhesion on new or porous floors apply 1-2 coats of Basecoat 456 Sealer before the floor finish.
Maintenance: To maintain shine, keep dirt and grit off the floor. Regular washing with a damp mop and periodic scrubbing with the appropriate cleaner or disinfectant is recommended.
Touch Ups: Recoat Duralok 475 over clean surfaces only.
Duralok 475 is a self-polishing finish but may be burnished to a higher gloss or spray buffed to obtain a deep, bright appearance.
FOR BEST RESULTS Do not dilute. Do not use on cold surfaces. To avoid contamination do not return used finish to original container.
