For surfaces and/or objects that may come into direct contact with children at the mouthing stage of development a rinse with potable water is recommended.
This product is not for use on critical and semi-critical medical device surfaces.
GENERAL CLEANING: Spray soiled area then wipe with a dry paper towel or lint-free cloth.
DISINFECTING, DEODORIZING: Remove gross filth or heavy soil prior to
application of AIRX Spray N Go. Hold container 15-20 cm from the surface to be treated. Spray area until it is covered with the product. Allow surface to remain visibly wet for 5 minutes.
No scrubbing necessary. Allow treated surfaces to air dry or wipe off with a clean cloth, mop or sponge. When using on food contact surfaces: counter tops, stove tops, highchairs, kitchen appliances, thoroughly rinse all treated surfaces with potable water.
This product must not be used to
clean eating utensils, glassware and dishes. One-step cleaning and disinfecting of toilet bowls and urinals: Remove water from bowl by forcing water over the trap with swab mop applicator. Press swab mop against side of the bowl to remove excess water from applicator.
Apply 1 to 2 ounces (28 to 56 mL) of this product evenly across bowl surface, allowing
sufficient time for (the product or product name) to cover entire surface for maximum cleaning. Swab bowl completely using a scrub brush or toilet mop,
making sure to get under the rim. Let stand for 5 minutes and flush.
To disinfect food processing premises: floors, walls and storage areas, hold container 15-20 cm from the surface to be treated and spray area until it is covered with the solution.
Allow AIRX Spray N Go to penetrate and the surface to remain wet
for 5 minutes. Wipe off with a clean cloth, mop or sponge and let air dry. Thoroughly rinse all food contact surfaces with potable water.
Heavily soiled areas must be
pre-cleaned before using this product. Food products and packaging materials must be removed or carefully protected prior to using this product.
To disinfect food service establishment food contact surfaces: counter tops, appliances, tables, hold container 15-20 cm from the surface to be treated and spray area until it is covered with the solution.
Allow AIRX Spray N Go to penetrate and the surface to remain wet for 5 minutes. Wipe off with a clean cloth, mop or sponge and thoroughly rinse all food contact surfaces in the area with potable water.
Heavily soiled areas must be pre-cleaned before using this product. Do not use on eating utensils, glassware and cookware.
Disinfection of animal quarters and kennels: To disinfect pre-cleaned animal quarters and kennels, apply AIRX Spray N Go. Remove all animals and feed from premises.
Remove all litter and droppings from floors, walls and surfaces of facilities
occupied or traversed by animals. Empty all troughs, racks, and other feeding and
watering appliances. Thoroughly clean all surfaces with soap or detergent and rinse with water. Saturate the surfaces with the disinfecting solution for a period of 5 minutes (for Canine Parvovirus). Ventilate building and other closed spaces. Do not house animals or employ equipment until treatment has been absorbed, set or dried. All treated equipment that will contact feed or drinking water must be rinsed
with potable water before reuse.
